Rear bumper to convert a Porsche 964 to the classical and historical 911 S Look.
This bumper is a three piece design (fiberglass bumper corners and steel middle section) which will be combined by mounting our powder coated adapter brackets. The chrome overriders, which can be ordered as an option, are fixed with the center panel and the adapter holders.
The bumper has a width of about 1560 mm from fender tip to fender tip and is therefore suitable for cars with a width of about 1545 - 1575 mm.
When installing this bumper inevitably the narrow rear side walls from the 911 S (until 1973) have to be mounted. If you want to keep the original width of the 964 C2 / C4 you must use the rear bar of the 964 2.7 RS Backdate.
The bumper is delivered as standard with no exhaust cutouts, so that the cutouts can be individually adapted to your manufactured exhaust system. This bumper is NOT suitable for use in conjunction with the standard exhaust system, it requires in any case a specially made exhaust system for this conversion.
Will fit all 964 models from 1989-1994.
|Category:||Backdate 964 - 2,4 S|
|Shipping costs class:||8,00 kg|
|Product weight ca.:||6,30 kg|
|Condition:||New and unpainted|
|Installation notes:||Depending on the manufacturing and material, in some individual cases either adjustments to the vehicle or to our parts may be necessary. This is not a defect!|
|Use / Application:||Basically, our parts are racing parts without Tüv or street usel! If you have any questions, please contact us before buying.|